Investigation of the Tribological Behavior of Eutectic Al-Si Casting Alloy
Tikrit Journal of Engineering Sciences,
Volume 24, Issue 3, Pages 42-46
AbstractThe effect of roughness of Al-Si alloy on the wear is investigated. Roughness average (Ra) was verified via different polishing, also was using a pin–on-disc of different loads (5, 10, 15) N, different speeds (100, 200, 300) rpm and relative humidity 74%. Different values of Ra are obtained with (3, 5 and 7) µm. Worn surface were characterized using SEM / EDX. The results show that the wear rate of Al-Si eutectic alloys increases with the roughness increase. It was noticed that the specific and wear decreases as roughness decreases. Severe wear was observed at all loads.
- Article View: 59
- PDF Download: 35